dmesg - AMD Athlon 64 X2 5000
random: get_random_bytes called from start_kernel+0x35/0x40d with crng_init=0
Linux version 4.13.11-1-ARCH (builduser@tobias) (gcc version 7.2.0 (GCC)) #1 SMP PREEMPT Thu Nov 2 10:47:45 CET 2017
x86/fpu: x87 FPU will use FXSAVE
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007bfaffff] usable
BIOS-e820: [mem 0x000000007bfb0000-0x000000007bfbffff] ACPI data
BIOS-e820: [mem 0x000000007bfc0000-0x000000007bfeffff] ACPI NVS
BIOS-e820: [mem 0x000000007bff0000-0x000000007bffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
random: fast init done
SMBIOS 2.4 present.
DMI: To Be Filled By O.E.M. ALiveNF4G-DVI/ALiveNF4G-DVI, BIOS P1.00 07/10/2006
tsc: Fast TSC calibration using PIT
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x7bfb0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
Scanning 1 areas for low memory corruption
initial memory mapped: [mem 0x00000000-0x07bfffff]
Base memory trampoline at [c009b000] 9b000 size 16384
BRK [0x079a1000, 0x079a1fff] PGTABLE
RAMDISK: [mem 0x7b387000-0x7bfaffff]
Allocated new RAMDISK: [mem 0x36bd5000-0x377fd202]
Move RAMDISK from [mem 0x7b387000-0x7bfaf202] to [mem 0x36bd5000-0x377fd202]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FA1B0 000014 (v00 ACPIAM)
ACPI: RSDT 0x000000007BFB0000 000038 (v01 A M I OEMRSDT 07000610 MSFT 00000097)
ACPI: FACP 0x000000007BFB0200 000084 (v02 A M I OEMFACP 07000610 MSFT 00000097)
ACPI: DSDT 0x000000007BFB0440 004F60 (v01 ALNF4 ALNF4008 00000008 INTL 02002026)
ACPI: FACS 0x000000007BFC0000 000040
ACPI: APIC 0x000000007BFB0390 000070 (v01 A M I OEMAPIC 07000610 MSFT 00000097)
ACPI: MCFG 0x000000007BFB0400 00003C (v01 A M I OEMMCFG 07000610 MSFT 00000097)
ACPI: OEMB 0x000000007BFC0040 00005E (v01 A M I AMI_OEM 07000610 MSFT 00000097)
ACPI: HPET 0x000000007BFB53A0 000038 (v01 A M I OEMHPET0 07000610 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
1095MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
BRK [0x079a2000, 0x079a2fff] PGTABLE
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
Normal [mem 0x0000000001000000-0x00000000377fdfff]
HighMem [mem 0x00000000377fe000-0x000000007bfaffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x000000007bfaffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000007bfaffff]
On node 0 totalpages: 507726
free_area_init_node: node 0, pgdat c77dee40, node_mem_map f5875028
DMA zone: 40 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3998 pages, LIFO batch:0
Normal zone: 2180 pages used for memmap
Normal zone: 223230 pages, LIFO batch:31
HighMem zone: 280498 pages, LIFO batch:31
Using APIC driver default
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e7fff]
PM: Registered nosave memory: [mem 0x000e8000-0x000fffff]
e820: [mem 0x7c000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
percpu: Embedded 20 pages/cpu @f584a000 s50444 r0 d31476 u81920
pcpu-alloc: s50444 r0 d31476 u81920 alloc=20*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 505506
Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/mapper/rootvg-tdroot rw initrd=../initramfs-linux.img
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (000377fe:0007bfb0)
Initializing Movable for node 0 (00000000:00000000)
Memory: 1987700K/2030904K available (5856K kernel code, 627K rwdata, 1684K rodata, 704K init, 772K bss, 43204K reserved, 0K cma-reserved, 1121992K highmem)
virtual kernel memory layout:
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
ftrace: allocating 26686 entries in 53 pages
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS: 2304, nr_irqs: 440, preallocated irqs: 16
CPU 0 irqstacks, hard=f5074000 soft=f5076000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2605.483 MHz processor
tsc: Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 5213.08 BogoMIPS (lpj=8684943)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170531
ACPI: 1 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
LVT offset 0 assigned for vector 0xf9
process: using AMD E400 aware idle routine
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
Freeing SMP alternatives memory: 24K
smpboot: Max logical packages: 1
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ (family: 0xf, model: 0x6b, stepping: 0x2)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
Hierarchical SRCU implementation.
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
CPU 1 irqstacks, hard=f5158000 soft=f515a000
x86: Booting SMP configuration:
.... node #0, CPUs: #1
Initializing CPU#1
smp: Brought up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (10425.04 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x7bfc0000-0x7bfeffff] (196608 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 512 (order: 3, 32768 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 4:46:05, date: 11/17/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
node 0 link 0: io port [1000, ffffff]
TOM: 0000000080000000 aka 2048M
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [80000000, fe0bffff]
bus: [bus 00-ff] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0x80000000-0xffffffff]
bus: 00 [mem 0x000a0000-0x000bffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
PCI: Using configuration type 1 for base access
HugeTLB registered 4.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A03:00: host bridge window [io 0x0cf8-0x0cff] (ignored)
acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7 window] (ignored)
acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff window] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff window] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x80000000-0xfeffffff window] (ignored)
PCI: root bus 00: hardware-probed resources
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xffffffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: busn_res: can not insert [bus 00-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [10de:02f1] type 00 class 0x050000
pci 0000:00:00.1: [10de:02fa] type 00 class 0x050000
pci 0000:00:00.2: [10de:02fe] type 00 class 0x050000
pci 0000:00:00.3: [10de:02f8] type 00 class 0x050000
pci 0000:00:00.4: [10de:02f9] type 00 class 0x050000
pci 0000:00:00.5: [10de:02ff] type 00 class 0x050000
pci 0000:00:00.6: [10de:027f] type 00 class 0x050000
pci 0000:00:00.7: [10de:027e] type 00 class 0x050000
pci 0000:00:03.0: [10de:02fd] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: [10de:02fb] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:05.0: [10de:0242] type 00 class 0x030000
pci 0000:00:05.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
pci 0000:00:05.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:05.0: reg 0x1c: [mem 0xfc000000-0xfcffffff 64bit]
pci 0000:00:05.0: reg 0x30: [mem 0xfeae0000-0xfeafffff pref]
pci 0000:00:09.0: [10de:0270] type 00 class 0x050000
pci 0000:00:0a.0: [10de:0261] type 00 class 0x060100
pci 0000:00:0a.1: [10de:0264] type 00 class 0x0c0500
pci 0000:00:0a.1: reg 0x20: [io 0x5000-0x503f]
pci 0000:00:0a.1: reg 0x24: [io 0x6000-0x603f]
pci 0000:00:0a.1: PME# supported from D3hot D3cold
pci 0000:00:0b.0: [10de:026d] type 00 class 0x0c0310
pci 0000:00:0b.0: reg 0x10: [mem 0xfeade000-0xfeadefff]
pci 0000:00:0b.0: supports D1 D2
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.1: [10de:026e] type 00 class 0x0c0320
pci 0000:00:0b.1: reg 0x10: [mem 0xfeadfc00-0xfeadfcff]
pci 0000:00:0b.1: supports D1 D2
pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0e.0: [10de:0266] type 00 class 0x010185
pci 0000:00:0e.0: reg 0x10: [io 0xd800-0xd807]
pci 0000:00:0e.0: reg 0x14: [io 0xd480-0xd483]
pci 0000:00:0e.0: reg 0x18: [io 0xd400-0xd407]
pci 0000:00:0e.0: reg 0x1c: [io 0xd080-0xd083]
pci 0000:00:0e.0: reg 0x20: [io 0xd000-0xd00f]
pci 0000:00:0e.0: reg 0x24: [mem 0xfeadd000-0xfeaddfff]
pci 0000:00:10.0: [10de:026f] type 01 class 0x060401
pci 0000:00:10.1: [10de:026c] type 00 class 0x040300
pci 0000:00:10.1: reg 0x10: [mem 0xfead8000-0xfeadbfff]
pci 0000:00:10.1: PME# supported from D3hot D3cold
pci 0000:00:14.0: [10de:0269] type 00 class 0x068000
pci 0000:00:14.0: reg 0x10: [mem 0xfeadc000-0xfeadcfff]
pci 0000:00:14.0: reg 0x14: [io 0xcc00-0xcc07]
pci 0000:00:14.0: supports D1 D2
pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:03:08.0: [1282:9102] type 00 class 0x020000
pci 0000:03:08.0: reg 0x10: [io 0xe800-0xe8ff]
pci 0000:03:08.0: reg 0x14: [mem 0xfebffc00-0xfebffcff]
pci 0000:03:08.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
pci 0000:03:08.0: PME# supported from D3hot D3cold
pci 0000:00:10.0: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:10.0: bridge window [io 0xe000-0xefff]
pci 0000:00:10.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:10.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:10.0: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
pci 0000:00:10.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *15
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *11
ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *15
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *14
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *15
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *15
ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *15
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
ACPI: Enabled 1 GPEs in block 00 to 1F
pci 0000:00:05.0: vgaarb: setting as boot VGA device
pci 0000:00:05.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:05.0: vgaarb: bridge control possible
vgaarb: loaded
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7bfb0000-0x7bffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:01: [dma 3]
pnp 00:01: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNPb02f (active)
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:03: [io 0x0800-0x080f] has been reserved
system 00:03: [io 0x4000-0x407f] has been reserved
system 00:03: [io 0x4080-0x40ff] has been reserved
system 00:03: [io 0x4400-0x447f] has been reserved
system 00:03: [io 0x4480-0x44ff] has been reserved
system 00:03: [io 0x4800-0x487f] has been reserved
system 00:03: [io 0x4880-0x48ff] has been reserved
system 00:03: [io 0x2000-0x207f] has been reserved
system 00:03: [io 0x2080-0x20ff] has been reserved
system 00:03: [mem 0xfefe0000-0xfefe01ff] has been reserved
system 00:03: [mem 0xfee01000-0xfeefffff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: [mem 0xfea80000-0xfeabffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:06: [io 0x0290-0x029f] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:08: [mem 0x00100000-0x7fffffff] could not be reserved
system 00:08: [mem 0xff000000-0xffffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:10.0: PCI bridge to [bus 03]
pci 0000:00:10.0: bridge window [io 0xe000-0xefff]
pci 0000:00:10.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x80000000-0xffffffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:03: resource 4 [io 0x0000-0xffff]
pci_bus 0000:03: resource 5 [mem 0x80000000-0xffffffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:05.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
pci 0000:00:09.0: Found enabled HT MSI Mapping
pci 0000:00:09.0: Found enabled HT MSI Mapping
pci 0000:00:09.0: Found enabled HT MSI Mapping
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 12452K
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x258e77c963c, max_idle_ns: 440795279734 ns
apm: disabled - APM is not SMP safe.
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=14 max_order=19 bucket_order=5
zbud: loaded
Key type asymmetric registered
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
pcieport 0000:00:03.0: Signaling PME with IRQ 24
pcieport 0000:00:04.0: Signaling PME with IRQ 25
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
RAS: Correctable Errors collector initialized.
Using IPI No-Shortcut mode
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Key type big_key registered
Magic number: 9:964:767
rtc_cmos 00:00: setting system clock to 2017-11-17 04:46:06 UTC (1510893966)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 704K
Write protecting the kernel text: 5860k
Write protecting the kernel read-only data: 1688k
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
i8042: PNP: No PS/2 controller found.
i8042: Probing ports directly.
Floppy drive(s): fd0 is 1.44M
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:0b.1: EHCI Host Controller
ehci-pci 0000:00:0b.1: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:0b.1: debug port 1
ehci-pci 0000:00:0b.1: cache line size of 64 is not supported
ehci-pci 0000:00:0b.1: irq 22, io mem 0xfeadfc00
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
libata version 3.00 loaded.
ehci-pci 0000:00:0b.1: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:0b.0: OHCI PCI host controller
ohci-pci 0000:00:0b.0: new USB bus registered, assigned bus number 2
ohci-pci 0000:00:0b.0: irq 23, io mem 0xfeade000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
sata_nv 0000:00:0e.0: version 3.5
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
sata_nv 0000:00:0e.0: Using SWNCQ mode
scsi host0: sata_nv
scsi host1: sata_nv
ata1: SATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd000 irq 21
ata2: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xd008 irq 21
usb 1-2: new high-speed USB device number 2 using ehci-pci
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-9: WDC WD40EZRZ-00WN9B0, 80.00A80, max UDMA/133
ata1.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD40EZRZ-00W 0A80 PQ: 0 ANSI: 5
usb 1-2.2: new full-speed USB device number 3 using ehci-pci
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 1-2.3: new low-speed USB device number 4 using ehci-pci
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-9: WDC WD40EZRZ-00WN9B0, 80.00A80, max UDMA/133
ata2.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD40EZRZ-00W 0A80 PQ: 0 ANSI: 5
input: USB Keyboard as /devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2.3/1-2.3:1.0/0003:09DA:0260.0004/input/input2
sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
hid-generic 0003:09DA:0260.0004: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:0b.1-2.3/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2.3/1-2.3:1.1/0003:09DA:0260.0005/input/input3
sda: sda1 sda2 sda3 sda4 sda5
sd 0:0:0:0: [sda] Attached SCSI disk
hid-generic 0003:09DA:0260.0005: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:0b.1-2.3/input1
sdb: sdb1 sdb2 sdb3 sdb4 sdb5
sd 1:0:0:0: [sdb] Attached SCSI disk
floppy0: no floppy controllers found
md: md0 stopped.
md/raid1:md0: active with 2 out of 2 mirrors
md0: detected capacity change from 0 to 522125312
md: md1 stopped.
md/raid1:md1: active with 2 out of 2 mirrors
md1: detected capacity change from 0 to 31671189504
random: crng init done
md: md2 stopped.
md/raid1:md2: active with 2 out of 2 mirrors
md2: detected capacity change from 0 to 2093662339072
md: md3 stopped.
md/raid1:md3: active with 2 out of 2 mirrors
md3: detected capacity change from 0 to 801227407360
md: md5 stopped.
md/raid1:md5: active with 2 out of 2 mirrors
md5: detected capacity change from 0 to 991653003264
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 235 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86.
systemd[1]: Set hostname to .
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Host and Network Name Lookups.
systemd[1]: Created slice System Slice.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Listening on RPCbind Server Activation Socket.
systemd[1]: Listening on udev Kernel Socket.
EXT4-fs (dm-0): re-mounted. Opts: data=ordered
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
systemd-journald[267]: Received request to flush runtime journal from PID 1
Floppy drive(s): fd0 is 1.44M
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
i2c i2c-0: nForce2 SMBus adapter at 0x5000
i2c i2c-1: nForce2 SMBus adapter at 0x6000
parport_pc 00:01: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
Linux agpgart interface v0.103
gameport gameport0: NS558 PnP Gameport is pnp00:02/gameport0, io 0x200, speed 635kHz
nv_tco: NV TCO WatchDog Timer Driver v0.01
nv_tco: Watchdog reboot not detected
nv_tco: initialized (0x4440). heartbeat=30 sec (nowayout=0)
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:0b.1-2.2/input2
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
snd_hda_intel 0000:00:10.1: msi for device 1849:0888 set to 0
snd_hda_intel 0000:00:10.1: position_fix set to 1 for device 1849:0888
ACPI: PCI Interrupt Link [LNEC] enabled at IRQ 19
nouveau 0000:00:05.0: NVIDIA C51 (04e000a2)
nouveau 0000:00:05.0: bios: version 05.51.28.39.00
nouveau 0000:00:05.0: fb: 64 MiB of unknown memory type
input: PC Speaker as /devices/platform/pcspkr/input/input6
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 18
MPU-401 device not found or device busy
net eth0: Davicom DM9102 at pci0000:03:08.0, 00:80:ad:00:81:62, irq 18
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
snd_hda_codec_realtek hdaudioC0D0: CD=0x1c
kvm: Nested Virtualization enabled
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
powernow_k8: fid 0x12 (2600 MHz), vid 0x9
powernow_k8: fid 0x10 (2400 MHz), vid 0xb
powernow_k8: fid 0xe (2200 MHz), vid 0xd
powernow_k8: fid 0xc (2000 MHz), vid 0xf
powernow_k8: fid 0xa (1800 MHz), vid 0x11
powernow_k8: fid 0x2 (1000 MHz), vid 0x12
powernow_k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ (2 cpu cores) (version 2.20.00)
[TTM] Zone kernel: Available graphics memory: 439444 kiB
[TTM] Zone highmem: Available graphics memory: 1000440 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau 0000:00:05.0: DRM: VRAM: 61 MiB
nouveau 0000:00:05.0: DRM: GART: 512 MiB
nouveau 0000:00:05.0: DRM: TMDS table version 1.1
nouveau 0000:00:05.0: DRM: TMDS table script pointers not stubbed
nouveau 0000:00:05.0: DRM: DCB version 3.0
nouveau 0000:00:05.0: DRM: DCB outp 00: 02000300 00000023
nouveau 0000:00:05.0: DRM: DCB outp 01: 03011312 00000000
nouveau 0000:00:05.0: DRM: DCB conn 00: 0000
nouveau 0000:00:05.0: DRM: Saving VGA fonts
nouveau 0000:00:05.0: DRM: unknown connector type ff
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveau 0000:00:05.0: DRM: MM: using M2MF for buffer copies
nouveau 0000:00:05.0: DRM: allocated 1920x1080 fb: 0x9000, bo f4485400
fbcon: nouveaufb (fb0) is primary device
ppdev: user-space parallel port driver
Console: switching to colour frame buffer device 240x67
nouveau 0000:00:05.0: fb0: nouveaufb frame buffer device
[drm] Initialized nouveau 1.3.1 20120801 for 0000:00:05.0 on minor 0
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
k8temp 0000:00:18.3: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
dmfe 0000:03:08.0 lan30: renamed from eth0
input: Logitech T400 as /devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2.2/1-2.2:1.2/0003:046D:C52B.0003/0003:046D:4026.0006/input/input8
logitech-hidpp-device 0003:046D:4026.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech T400] on usb-0000:00:0b.1-2.2:1
mousedev: PS/2 mouse device common for all mice
Adding 2097148k swap on /dev/mapper/rootvg-tdswap. Priority:-1 extents:1 across:2097148k FS
forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:13:8f:c2:47:fc
forcedeth 0000:00:14.0: highdma pwrctl lnktim desc-v3
forcedeth 0000:00:14.0 lan10: renamed from eth0
EXT4-fs (md0): mounting ext2 file system using the ext4 subsystem
EXT4-fs (md0): mounted filesystem without journal. Opts: block_validity,barrier,user_xattr,acl,stripe=4
EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: data=ordered
floppy0: no floppy controllers found
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: data=ordered
forcedeth 0000:00:14.0 lan10: no link during initialization
IPv6: ADDRCONF(NETDEV_UP): lan10: link is not ready
w83627ehf: Found W83627EHG chip at 0x290
w83627ehf w83627ehf.656: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
forcedeth 0000:00:14.0 lan10: link up
IPv6: ADDRCONF(NETDEV_CHANGE): lan10: link becomes ready
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:10.1/sound/card0/input9
input: HDA NVidia Mic as /devices/pci0000:00/0000:00:10.1/sound/card0/input10
input: HDA NVidia Line as /devices/pci0000:00/0000:00:10.1/sound/card0/input11
input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:10.1/sound/card0/input12
input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:10.1/sound/card0/input13
input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:10.1/sound/card0/input14
input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:10.1/sound/card0/input15
NFSD: starting 90-second grace period (net c77d3940)
usb 1-2: USB disconnect, device number 2
usb 1-2.2: USB disconnect, device number 3
usb 1-2.3: USB disconnect, device number 4
usb 1-2: new high-speed USB device number 5 using ehci-pci
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb 1-2.2: new full-speed USB device number 6 using ehci-pci
logitech-djreceiver 0003:046D:C52B.0009: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:0b.1-2.2/input2
input: Logitech T400 as /devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2.2/1-2.2:1.2/0003:046D:C52B.0009/0003:046D:4026.000A/input/input16
logitech-hidpp-device 0003:046D:4026.000A: input,hidraw1: USB HID v1.11 Keyboard [Logitech T400] on usb-0000:00:0b.1-2.2:1
usb 1-2.3: new low-speed USB device number 7 using ehci-pci
input: USB Keyboard as /devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2.3/1-2.3:1.0/0003:09DA:0260.000B/input/input17
hid-generic 0003:09DA:0260.000B: input,hidraw2: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:0b.1-2.3/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2.3/1-2.3:1.1/0003:09DA:0260.000C/input/input18
hid-generic 0003:09DA:0260.000C: input,hidraw3: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:0b.1-2.3/input1
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Initializing XFRM netlink socket
Netfilter messages via NETLINK v0.30.
ctnetlink v0.93: registering with nfnetlink.
IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
docker0: port 1(vethad572d5) entered blocking state
docker0: port 1(vethad572d5) entered disabled state
device vethad572d5 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethad572d5: link is not ready
eth0: renamed from vethb017884
IPv6: ADDRCONF(NETDEV_CHANGE): vethad572d5: link becomes ready
docker0: port 1(vethad572d5) entered blocking state
docker0: port 1(vethad572d5) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
perf: interrupt took too long (2514 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
perf: interrupt took too long (3162 > 3142), lowering kernel.perf_event_max_sample_rate to 63000
perf: interrupt took too long (3959 > 3952), lowering kernel.perf_event_max_sample_rate to 50400
EXT4-fs (md2): recovery complete
EXT4-fs (md2): mounted filesystem with ordered data mode. Opts: (null)
docker0: port 1(vethad572d5) entered disabled state
vethb017884: renamed from eth0
docker0: port 1(vethad572d5) entered disabled state
device vethad572d5 left promiscuous mode
docker0: port 1(vethad572d5) entered disabled state
EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: data=ordered
docker0: port 1(veth876dfe3) entered blocking state
docker0: port 1(veth876dfe3) entered disabled state
device veth876dfe3 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth876dfe3: link is not ready
eth0: renamed from veth4c1b4b4
IPv6: ADDRCONF(NETDEV_CHANGE): veth876dfe3: link becomes ready
docker0: port 1(veth876dfe3) entered blocking state
docker0: port 1(veth876dfe3) entered forwarding state
docker0: port 1(veth876dfe3) entered disabled state
veth4c1b4b4: renamed from eth0
docker0: port 1(veth876dfe3) entered disabled state
device veth876dfe3 left promiscuous mode
docker0: port 1(veth876dfe3) entered disabled state
docker0: port 1(veth05f1774) entered blocking state
docker0: port 1(veth05f1774) entered disabled state
device veth05f1774 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth05f1774: link is not ready
eth0: renamed from vethe51ccf2
IPv6: ADDRCONF(NETDEV_CHANGE): veth05f1774: link becomes ready
docker0: port 1(veth05f1774) entered blocking state
docker0: port 1(veth05f1774) entered forwarding state
docker0: port 1(veth05f1774) entered disabled state
vethe51ccf2: renamed from eth0
docker0: port 1(veth05f1774) entered disabled state
device veth05f1774 left promiscuous mode
docker0: port 1(veth05f1774) entered disabled state
docker0: port 1(veth8f98dda) entered blocking state
docker0: port 1(veth8f98dda) entered disabled state
device veth8f98dda entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth8f98dda: link is not ready
eth0: renamed from veth03b8d40
IPv6: ADDRCONF(NETDEV_CHANGE): veth8f98dda: link becomes ready
docker0: port 1(veth8f98dda) entered blocking state
docker0: port 1(veth8f98dda) entered forwarding state
docker0: port 1(veth8f98dda) entered disabled state
veth03b8d40: renamed from eth0
docker0: port 1(veth8f98dda) entered disabled state
device veth8f98dda left promiscuous mode
docker0: port 1(veth8f98dda) entered disabled state
docker0: port 1(veth18e4c37) entered blocking state
docker0: port 1(veth18e4c37) entered disabled state
device veth18e4c37 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth18e4c37: link is not ready
eth0: renamed from vethf918745
IPv6: ADDRCONF(NETDEV_CHANGE): veth18e4c37: link becomes ready
docker0: port 1(veth18e4c37) entered blocking state
docker0: port 1(veth18e4c37) entered forwarding state
docker0: port 1(veth18e4c37) entered disabled state
vethf918745: renamed from eth0
docker0: port 1(veth18e4c37) entered disabled state
device veth18e4c37 left promiscuous mode
docker0: port 1(veth18e4c37) entered disabled state
docker0: port 1(vethbfbb8d8) entered blocking state
docker0: port 1(vethbfbb8d8) entered disabled state
device vethbfbb8d8 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethbfbb8d8: link is not ready
eth0: renamed from veth172594b
IPv6: ADDRCONF(NETDEV_CHANGE): vethbfbb8d8: link becomes ready
docker0: port 1(vethbfbb8d8) entered blocking state
docker0: port 1(vethbfbb8d8) entered forwarding state
NET: Registered protocol family 38
EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)